Click on any thumbnail to see a full size picture
Front view & fold down grill guard
Welcome to our
informational web pages
This is a shared collection of pictures and information for our New Holland
TC-40D SS tractor
Links to our other informational pages include
Our
TC-40D-SS New Holland tractor
Adding
front hydraulics to a TC-40D-SS
Building
a bucket grapple for a TC-40D-SS
Adding a
snowplow to a TC-40D-SS
Building a
dolly for a 757C New Holland backhoe
Building
a boom sprayer with foam marker
Dealing
with wheel weights on a TC-40D-SS
Adding
a larger toolbox to a TC-40D-SS
Removing
17LA loader on a TC-40D-SS
Adding
rear remotes to a TC-40D-SS
This section covers our TC-40D-SS New Holland tractor
Click on any thumbnail to see a full size picture
Front view & fold down grill guard
TracTop fiberglass sun shade canopy made by Firebird Fiberglass Products This is a very sturdy canopy mounted on isolated rubber cushions to eliminate
rattles.
The business end of the New Holland 757C backhoe
The R4 tires are a lot more forgiving to the turf than R1 tires
No clutch or shifting gears here, this lady has a hydro transmission 2 ranges, each with 2 electronic power shifts, infinite variable speeds
available
Cruise control, set it and sit back and relax
New Holland 17LA Front End Loader
72 inch heavy duty quick attach bucket w/tooth bar (not shown)
2 lift/pull hooks welded to the reinforced section of the bucket
Bucket & pallet forks can be switched in less than 5 minutes (no tools
required)
Pallet fork attachment (another view)
We use a 3-point weight bar with 350 pounds of weight
to offset loads we place on the pallet forks the weight is applied
below the center of gravity to the rear axle.
3 Rear wheel weights on each side for 600 pounds total
With the weight bar the combined extra weight is 950 pounds total
Folding armrests on the swiveling suspension seat
The clear view over the hood from the drivers seat
SuperSteer front axle. When you cut the steering wheel all the way,
the wheels turn 54 degrees while the axle articulates an additional
21 degrees for a total of 75 degrees. It will literally turn on a dime and give
you nine cents change.
The Sensitrak clutch automatically engages 4WD whenever needed.
It may also be manually locked in the 4WD position..
This picture shows the canopy lights that we added.
It makes working with the loader at night a lot easier on the eyes.
This shot shows both hydraulic cylinders for the top and tilt that we added.
